TECHNONICOL MASTIC #57

Application areas

Reflective mastic for protection of roofs against UV-radiation and thermal aging. Use for:
– Installation of protective layer on new bitumen, polymer-bitumen mastic roofs;
– Recovery of protective layer on old bitumen, polymer-bitumen mastic and roll-fed roofs;
– Corrosion protection of roof coverings.

Description of material

The water-emulsion material produced by dispersion of bitumens in a water solution of emulsifiers and modification through latex. It does not contain solvents. Mechanized application drastically reduces the time needed to carry out the works. The mastic has enhanced properties. These coverings have a wide range of operating temperatures.

Method of application

Before application and during use carefully mix mastic for uniform distribution of the aluminum pigment. Apply mastic using a small paint brush, a roller or through use of an airless spraying unit. It is recommended to be applied in two layers of mastic. Mastic surface coverage for one layer:
– on mastic roof — 0.4 kg/m2;
– on old roll-fed roof — 0.6 kg/m2;
– on metal roof — 0.4 kg/m2.

Storage

  • Store in a dry place protected against sunlight at a temperature between –20°C and +30°C. Guaranteed storage period — 12 months.
  • Has thin coverage
  • Can be used in sub-zero temperatures
  • Protects against corrosion and premature aging
  • Has energy-conservation properties
  • Protects against surface heating

Specifications

Property   TECHNONICOL Mastic #57
Strength of adhesion to the base, MPa, not less than  with concrete  0,3 
with metal  0,3 
Strength of adhesion between layers, MPa, not less than  roll-fed material — roll-fed material  0,2 
Nominal strength, MPa, no less than   0,2 
Specific elongation when broken, %   200 
Water absorption over the course of 24 h, % by weight, not less than   2 
Mass fraction of non-volatile substances, %, not less than   50 
Heat endurance, °С, not less than   100 
Flexibility on R=5.0±0.2 mm beam at –50°C   no cracks 
Water resistance during 24 h at a pressure of 0.1 MPa   withstands 
Color resistance in the installation of an artificial climate, h, not less than   2 

TECHNONICOL MASTIC #57

Technical Data Sheet (TDS)

blog