TECHNONICOL mastic #23 is designed for precising the seams of flexible shingle and other bitumen materials and for adhesion of bitumen materials to brick, concrete, metal, wood, ceramic and other surfaces.
Clear the surface of dust, oils, ice-buildup and other contamination. Mastic application on a damp surface is not permitted. When applied to porous bases, the surface should first be prime-coated by using bitumen primer. Wait until the primer is fully dried. Carefully mix mastic before application! Distribute mastic using a putty knife on one of the surfaces in a layer 0.5–1 mm thick. Connect surfaces, avoiding the formation of folds and bubbles. It is recommended that special rollers be used for this. Press surfaces until the appearance of mastic from a seam. Application temperature range — from –5°C up to +40°C. Before using at low temperatures let the mastic stand at room temperature for a period of not less than a day.
TECHNONICOL mastic #23 is a multicomponent material consisting of bitumen, butadiene-styrene thermoplastic elastomer or its modifications, filler, solvent and technological additives.
| Property | TECHNONICOL Mastic #23 | |
| Strength of adhesion to the base, MPa, not less than | with concrete | 0,5 |
| with steel | 0,8 | |
| Strength of adhesion between layers, MPa, not less than | roll-fed material — concrete | 0,5 |
| roll-fed material — roll-fed material | 0,5 | |
| Shear strength of glued bond, kN/m, not less than | 4,0 | |
| Nominal strength, MPa, no less than | 75 | |
| Heat endurance, °С, not less than | 110 |
Best Waterproofing Solutions in Bangladesh tropical climate, old house roofs are particularly vulnerable to water [...]
Best Waterproofing Solutions in Bangladesh tropical climate, old house roofs are particularly vulnerable to water [...]
