TECHNONICOL 70 PROFESSIONAL

Professional Sealing Foam

Application areas

TECHNONICOL 70 PROFESSIONAL professional sealing foam is used for sealing joints, cracks, gaps during assembly of parts in construction and finishing work. It has thermal and noise insulation properties.

Description of material

TECHNONICOL 70 PROFESSIONAL sealing foam is a single-component polyurethane material in an aerosol container. The sealing foam is distinguished by good initial expansion, and an increased volume of foam emission. The foam has good adhesion to the majority of building materials, with the exception of PTFE, silicon and polyethylene. The sealing foam has a special formula which ensures an increased emission of foam.

Operation

All-season TECHNONICOL 70 PROFESSIONAL sealing foam is used at a temperature from -10°С to +35°С.
The cylinder temperature is from +18 °С to +25 °С.

Winter TECHNONICOL 70 PROFESSIONAL sealing foam is used at a temperature from -18°С to +35°С. The
cylinder temperature is from +18 °С to +25 °С.

Storage

  • The cylinders of foam should be stored and transported in a vertical position, in dry conditions at a temperature from +5°С to +25°С. A short-term reduction in temperature (for not more than 7 days) down to -20°С is permitted.
  • It is prohibited to store the cylinder in direct sunlight and allow it to heat up to a temperature above +50°С.
  • Guaranteed storage life — 18 months.

Specifications

TECHNONICOL 70 PROFESSIONAL

ALL-SEASON

WINTER
Total weight of cylinder, g 1020±10 1020±10
Volume of foam emitted from cylinder, l 70 70
Drying time at (23±5)⁰С, min 10 10
Time of total polymerization, h 24 30
Thermal conductivity, W/m*K 0.03 0.03
Tensile strength at break, kN/m2 80 80

blog