Technoelast TITAN

Application areas

Maximal reliability of roof waterproofing.

Method of application

Depending on the grade, the material is welded on a prepared surface using a gas burner or is installed mechanically.

Material application: according to the Manual for Designing and Installation of Roofs Made of Polymer-Bitumen Materials Manufactured by the TechnoNICOL Corporation.

for quotation For Buy: +880 1711 464779

Description of material

Technoelast TITAN is a material with unique physical and mechanical properties, excellent flexibility at negative temperatures and high heat endurance, allowing it to be used as waterproofing on roofs in zones with high temperature fluctuations. Wide range of dressing compound colors for various designs. Technoelast TITAN TOP is used as the top layer of multilayer roof cladding. Coarse-grained basalt dressing compound provides reliable protection of the material against sunlight.

Technoelast TITAN ВАSЕ is used for installation of the bottom layers of multilayer roof cladding and waterproofing of engineering structures.

Technoelast TITAN SOLO is used for installation of one-layer roof cladding and waterproofing of engineering structures. Technoelast TITAN can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Storage

Store vertically, in a place protected from direct sunlight.
Service life — 35 years
Waterproofing warranty — 10 years

Types of material

TITAN BASE
TITAN TOP
TITAN SOLO

Specifications:

Property		TITAN BASE	TITAN TOP	TITAN SOLO
Thickness, mm (±0.1 mm)		4,0	4,5	5,0
Mass of 1 m2, kg, (±0.25 kg)		4,5	5,5	5,8
Longitudinal/transverse breaking load, N, not less than	polyester	600/400	600/400	1000/800
Bend point on R=25 mm and R=10 mm beam, °C, no more than		-35	-35	-35
Heat endurance, °С, not less than		140	140	140
Protective covering type	on the top	film without logo	basalt	basalt
Protective covering type	on the bottom	film with logo	film with logo	film with logo
Length / width, m		10х1	10х1	8х1