TECHNOELAST THERMO

Application areas

Waterproofing of roofs, basements and other engineering structures. Recommended for use in regions where the material is used at elevated temperatures.

Method of application

The material is welded on a prepared surface using a gas burner or special purpose equipment.

Material application: according to the Manual for Designing and Installation of Roofs Made of Polymer-Bitumen Materials Manufactured by the TechnoNICOL Corporation.

Description of material

Technoelast THERMO is a waterproofing sheet produced by two-sided placing of a polymer-bitumen binder on a polyester or fiberglass base. Actually, the material is similar to Technoelast and is multifunctional. Because of special modifiers (APP-modifi ers), Technoelast THERMO retains its operating properties even at very high temperatures (up to +1300C).

Technoelast THERMO K is designed to be used as the top layer of roof cladding. Coarse-grained dressing compound protects the material against sunlight. Technoelast THERMO P is used for installation of the bottom layer of roof cladding and for waterproofing of engineering structures (basements, etc.). Technoelast THERMO can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Storage

  • Store vertically, in a place protected from direct sunlight.
  • Waterproofing warranty — 10 years
  • Service life — 25-30 years

Types of material

  • EPP
  • HPP
  • EKP
  • TKP

Specifications:

Property   EPP HPP EKP TKP
Thickness, mm (±0.1 mm)   4,0  3,0  4,2  4,2 
Mass of 1 m2, kg, (±0.25 kg)   4,4  3,4  5,1  5,1 
Breaking load when tensioning, N, not less than  polyester  600/400  –  600/400  – 
Breaking load* when tensioning, N, not less than  fiberglass  –  –  –  800/900 
fiberglass mat  –  294/-  –  – 
Bend point on R=25 mm and R=10 mm beam, °C, no more than   -15  -15  -15  -15 
Heat endurance, °С, not less than   130  130  130  130 
Protective covering type  on the top  film without logo  film without logo  slate  slate 
on welded-on side  film with logo  film with logo  film with logo  film with logo 
Length / width, m   10х1  10х1  10х1  10х1 

blog