TECHNOELAST PRIME

Application areas

Roof waterproofing with fireless installation on mastic.

Method of application

Materials in Technoelast PRIME series are not designed for welding. Adhesive TECHNONICOL mastic #22 (Vishera) is used to fix the material.

Material application: according to the Manual for Designing and Installation of Roofs Made of Technoelast PRIME and Technoelast SOLO Materials Manufactured by the TechnoNICOL Company and Laid on Cold Mastic.

Description of material

Technoelast PRIME is a roofing polymer-bitumen material for installation of the bottom and top layers designed for installation of two-layer roof claddings with mastic adhesion. This technology combines the advantages of roofs made of roll-fed materials and seamless solid mastic roofs.

Technoelast PRIME EKM is a material with coarse-grained dressing compound on the face and fine-grained dressing compound on the bottom side of the sheet used for the installation of the top layer of roof cladding.

Technoelast PRIME EMM is a material with fi ne-grained dressing compound on both sides of the sheet used for the installation of the bottom layer of roof cladding.

Storage

Store vertically, in a place protected from direct sunlight.

Types of material

  • Technoelast PRIME EMM
  • Technoelast PRIME EKM

Specifications:

Property   Technoelast PRIME EMM Technoelast PRIME EKM
Thickness, mm (±0.1 mm)   3,0  4,0 
Mass of 1 m2, kg, (±0.25 kg)   3,0  4,0 
Longitudinal/transverse breaking load, N, not less than  polyester  600/600  600/600 
Bend point on R=25 mm and R=10 mm beam, °C, no more than   -25  -25 
Heat endurance, °С, not less than   100  100 
Protective covering type  on the top  sand  slate 
on the bottom  sand  sand 
Length / width, m   10х1  10х1 

 

blog