TECHNOELAST GREEN

Application areas

Waterproofing of multipurpose roofs with planting.

Method of application

The material is welded on using a gas burner. Used as the top layer of waterproofing cladding.

Material application: according to the Manual for Designing and Installation of Multipurpose Roofs with Planting Using Technoelast GREEN Material with Increased Protection from Penetration of Plant Root Systems.

Description of material

Technoelast GREEN is specially designed for waterproofing of green roofs and underground engineering structures. Special additives to the polymer-bitumen binder make it resistant to damage caused by roots of plants and ensure reliable waterproofing.

Technoelast GREEN K is applied as the top layer of roof cladding. Coarse-grained dressing compound on the top side of the sheet protects of the polymer-bitumen layer against sunlight exposure.

Technoelast GREEN P is used for waterproofing of roofs and underground engineering structures. Chemical and mechanical protection from root sprouting in the form of a thick polymer film on the top.

Technoelast GREEN can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Storage

  • Store vertically, in a place protected from direct sunlight.
  • Waterproofing warranty — 10 years
  • Service life — 25-30 years

Types of material

  • Technoelast GREEN EPP
  • Technoelast GREEN EKP

Specifications:

Property   Technoelast GREEN EPP Technoelast GREEN EKP
Thickness, mm (±0.1 mm)   4,0  4,2 
Mass of 1 m2, kg, (±0.25 kg)   5,0  5,2 
Longitudinal/transverse breaking load, N, not less than  polyester  600/400  600/400 
Bend point on R=25 mm and R=10 mm beam, °C, no more than   -25  -25 
Heat endurance, °С, not less than   100  100 
Protective covering type  on the top  thick film  slate 
on welded-on side  film with logo  film with logo 
Length / width, m   10х1  10х1 

 

blog