Technoelast FIX

Application areas

Roof waterproofing for mechanical fastening.

Method of application

The material is installed using a special fi xture on a prepared base. Seams are sealed using a propane burner.

Material application: according to the Manual for Designing and Installation of Roofs with Mechanical Fastening Using Technoelast FIX and Technoelast SOLO Materials.

Description of material

Technoelast FIX is a waterproofing sheet for the installation of roofi ng systems with mechanical fastening to the base (the material is used as the bottom layer of a two-layer system). Within a short period of time, this technology provides the roof cladding that can withstand large base deformations and operates as a “breathing” roof. The cross-reinforced foundation prevents deformation of Technoelast FIX, and sand on the bottom surface prevents the material from sticking to the base.

Technoelast FIX can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Storage

  • Store vertically, in a place protected from direct sunlight.
  • Waterproofing warranty — 10 years
  • Service life — 25-30 years

Specifications:

Property   Technoelast FIX
Thickness, mm (±0.1 mm)   3,0 
Mass of 1 m2, kg, (±0.25 kg)   4,0 
Longitudinal/transverse breaking load, N, not less than  polyester  600/600 
Bend point on R=25 mm and R=10 mm beam, °C, no more than   -25 
Heat endurance, °С, not less than   100 
polyester   600/600 
Crack resistance at the nail shank, N, not less than   260 
Protective covering type  on the top  film with logo 
on the bottom  coarse-grained sand 
Length / width, m   10х1 

blog