FIELDS OF APPLICATION
MasterSeal M 689 is used in a variety of waterproofing applications, especially where a high degree of chemical and mechanical resistance is required. Easy application to complicated details.
This includes:
- Wastewater treatment plants (urban and industrial), both in the inflow and outflow areas.
- Sewage effluent pipelines.
- Steel and concrete pipes.
- Secondary containment bunds in chemical and petrochemical industries.
Additionally, MasterSeal M 689 can be applied on:
- Flat and architectural roofs.
- Horizontal and vertical substrates.
- Internal and external areas.
- Concrete, cementitious mortar or steel substrates.
- Reinforced concrete to protect it against carbonation, chloride induced corrosion or chemical attack in industrial environments.
- Contact your local Master Builders Solutions representative regarding any application required not mentioned here.
FEATURES AND BENEFITS
Spray delivered and ultra fast curing: enables easy application to form a monolithic waterproofing membrane on simple and complex surfaces.
- Application to vertical surface without runs.
- Easy application to complicated details
Rapid curing:
- Rain resistance after only 30 seconds.
- Allows early serviceability
- Fully trafficable after only 12 hours
Continuous membrane: monolithic – no laps, welds, or seams
Excellent chemical resistance.
Waterproof and resistant to standing water.
Fully bonded to substrate: can be applied to a wide range of substrates with the appropriate primer.
High water vapour permeability: low risk of blistering.
High resistance to carbon dioxide diffusion: Protects concrete from rebar corrosion.
High abrasion and impact resistance: Withstand mechanical traffic.
High elasticity and crack bridging capability:
- Remains elastic at low temperatures; Tg approx. – 45 °C
- High durability and protection with reduced cracking due to embrittlement
Thermoset – does not soften at high temperatures.
