RECOMMENDED USES
MasterFlow 870 is used for all precision, non-shrink grouting applications with clearances of 10mm or more, including:
- critical equipment baseplates, soleplates & columns;
- precast wall panels, beams, columns, structural building members and curtain walls;
- patching poured in place concrete structures,
- e.g. honeycombing, using preplaced aggregate techniques;
- underpinning;
- concrete repair applications where a form and pour material is required;
- Applications requiring high early compressive strengths and high ultimate compressive strengths.
FEATURES AND BENEFITS
- High early strength – Ensures rapid commissioning of new equipment and structures.
- High ultimate strength – Ensures permanence of the installation under static and moderate repetitive loads.
- Flowable long life grout – Easy to grout intricate spaces normally inaccessible by conventional grouting technique.
- Extended working time – Facilitates grouting of large or difficult placements in a single pour, often without the use of a pump.
- Dense, non-shrink grout – Hardens free of bleeding, settlement and drying shrinkage, ensuring tight contact with all grouted surfaces.
- Easy to use – Requires no special mixing equipment, it can be mixed in a standard concrete mixer or in a pail using a grout stirrer.
- No added chloride – Does not add to chloride load of structure
- Compliance with codes – Meets the non-shrink requirements of ASTM C1090 and CRDC 621, Corps of Engineers Specification for Non-Shrink Grout; provides complete non shrink performance when tested in accordance with simulated Bedplate Technique; tested to the requirements of AS1478.2
