ECOFLEX

Application areas

Waterproofing of roofs and underground structures. Recommended for use in regions where the material is used at elevated temperatures.

Method of application

The material is welded on a prepared surface using a gas burner. Material application: according to the Manual for Designing and Installation of Roofs Made of Polymer-Bitumen Welded-On Materials Manufactured by the TechnoNICOL Corporation.

Description of material

Ecoflex is a waterproofing sheet produced by two-sided installation of high-quality polymer-bitumen binder on a strong rot-proof polyester or fiberglass base. Because of APP-modifi ers, Ecoflex retains its operating properties even at very high temperatures (up to +130°С).

Ecoflex K is applied as the top layer of roof cladding. Coarse-grained dressing compound on the face side protects the material against sunlight.

Ecoflex P is used as the bottom layer of roof cladding and for waterproofing of underground parts of engineering structures.

Ecoflex can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Storage

  • Store vertically, in a place protected from direct sunlight.
  • Retains operating properties at high temperatures
  • Waterproofing warranty — 8 years
  • Service life — 20-25 years

Types of material

  • EPP
  • TPP
  • HPP
  • EKP
  • TKP
  • HKP

Specifications

Property   EPP TPP HPP EKP TKP HKP
Thickness, mm (±0.1 mm)   2,8  2,8  2,8  3,8  3,8  3,8 
Mass of 1 m2, kg, (±0.25 kg)   3,7  3,7  3,7  4,7  4,7  4,7 
Longitudinal/transverse breaking load, N, not less than  polyester  500/350  –  –  500/350  –  – 
fiberglass  –  800/900  –  –  800/900  – 
fiberglass mat  –  –  294/–  –  –  294/– 
Bend point on R=25 mm beam, °C, no more than   -10  -10  -10  -10  -10  -10 
Heat endurance, °С, not less than   130  130  130  130  130  130 
Protective covering type  on the top  film without logo  film without logo  film without logo  granulated material, slate  granulated material, slate  granulated material, slate 
on welded-on side  film with logo  film with logo  film with logo  film with logo  film with logo  film with logo 
Length / width, m   10х1  10х1  10х1  10х1  10х1  10х1 

blog