BIPOLE

Application areas

Waterproofing of roofs. Vapor proofing of roofs.

Method of application

The material is welded on a prepared surface using a gas burner. Material application: according to the Manual for Designing and Installation of Roofs Made of Bitumen Materials Manufactured by the TechnoNICOL Company.

Description of material

Bipole is a waterproofing sheet produced by two-sided installation of a polymer-bitumen binder on a dense rot-proof base. The material is ommended for installation of roof cladding and for use as vaporproofing.

Bipole K — coarse-grained dressing compound from the face protects the material from sunlight. Used as the top layer of roof cladding.

Bipole P is produced with a polymer fi lm that is used as a protective layer. It is used for vaporproofi ng and as the bottom layer of roof cladding.

Bipole can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Storage

  • Store vertically, in a place protected from direct sunlight.
  • Service life — 10-15 years

Types of material

  • EPP
  • TPP
  • HPP
  • EKP
  • TKP
  • HKP

Specifications:

Property   EPP TPP HPP EKP TKP HKP
Mass of 1 m2, kg, (±0.25 kg)   3,0  3,0  3,0  TKP HKP  4,0  4,0 
Longitudinal/transverse breaking load, N, not less than  polyester  343/-  –  –  343/-  –  – 
fiberglass  –  800/900  –  –  800/900  – 
fiberglass mat  –  –  294/-  –  –  294/- 
Bend point on R=25 mm beam, °C, no more than   -15  -15  -15  -15  -15  -15 
Heat endurance, °С, not less than   85  85  85  85  85  85 
Protective covering type  on the top  film without logo  film without logo  film without logo  granulated material, slate  granulated material, slate  granulated material, slate 
on welded-on side  film with logo  film with logo  film with logo  film with logo  film with logo  film with logo 
Length / width, m   15х1  15х1  15х1  10х1  10х1  10х1 

blog