BICROELAST

Application areas

Waterproofing of roofs. Vapor proofing of roofs.

Method of application

The material is welded on a prepared surface using a gas burner. Material application: according to the Manual for Designing and Installation of Roofs Made of Bitumen Materials Manufactured by the TechnoNICOL Company.

Description of material

Bicroelast is a waterproofing sheet produced by two-sided installation of a polymer-bitumen binder with special additives on a dense rot-proof base.

Bicroelast K is applied as the top layer of roof cladding. Coarse-grained dressing compound protects the material from sunlight.

Bicroelast P is used for vaporproofing and as the bottom layer of roof cladding. The polymer film is used as a protective layer.

Bicroelast can be used in all climatic zones (as determined in Construction Codes and Regulation (SNiP) 23-01-99*).

Storage

  • Store vertically, in a place protected from direct sunlight.
  • Service life — up to 10 years

Types of material

  • EPP
  • TPP
  • HPP
  • EKP
  • TKP
  • HKP

Specifications:

Property   EPP TPP HPP EKP TKP HKP
Mass of 1 m2, kg, (±0.25 kg)   3,0  3,0  3,0  4,0  4,0  4,0 
Longitudinal/transverse breaking load, N, not less than  polyester  343/—  –  –  343/-  –  – 
fiberglass  –  294/–  –  –  800/900  – 
fiberglass mat  –  –  294/-  –  –  294/- 
Bend point on R=25 mm beam, °C, no more than   -10  -10  -10  -10  -10  -10 
Heat endurance, °С, not less than   85  85  85  85  85  85 
Protective covering type  on the top  film without logo  film without logo  film without logo  granulated material, slate  granulated material, slate  granulated material, slate 
on welded-on side  film with logo  film with logo  film with logo  film with logo  film with logo  film with logo 
Length / width, m   15х1  15х1  15х1  10х1  10х1  10х1 

blog