RECOMMENDED USES
MasterTop 1225 is recommended for re-topping worn level toppings or to provide a self-smoothing surface over flat floors. Application areas include:
- Pharmaceutical and other medical laboratory situations or clean room areas
- Engineering – including car production and aircraft maintenance units.
- Automobile servicing and assembly areas
- Light Industrial application
- High stack warehouses
FEATURES AND BENEFITS
- Durable – high abrasion resistance even in tough conditions
- Chemically resistant -Resistant to general chemicals and spillages
- Easy to maintain – Seamless hygienic, pore free surface
APPLICATION
The floor receiving MasterTop 1225 must be sound, dry, fine-grained and load bearing, free of laitance, loose and brittle particles and substances which impair adhesion such as oil, grease, rubber skid marks, paint or other contaminants. The bond strength of the substrate must be at least 1.5 MPa. Ensure that the compressive strength of floor concrete is at least 25MPa and that floor slabs directly in contact with the ground have a proper vapour barrier installed and the moisture content of substrate shall not be higher than 4% throughout.
Temperature Requirements
- Substrate temperatures: 15ºC – 35ºC
- Material temperatures: 15ºC – 30ºC
